Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).
$12.99 - $15.89
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.
- Updated design, for use with all Saris racks where bikes are secured by the top tube - Bridges the gap from stem to seat tube, creating a virtual top tube - Useful on ladies and specialty frames
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
Add Saris' Freedom Long Wheelbase Bar to your Saris Freedom rack (sold separately) to carry an extra long wheelbase bicycle like a tandem or recumbent. The rack holds two bikes of up to 35 pounds each, and the Long Wheelbase Bar holds a bike that measures up to 57 inches axle to axle.
Saris' Spare Tire Plate is for use with their spare tire racks. Grab the Spare as an extra or replacement part.
Saris' Bike Beam connects to your bike's seatpost and stem to simulate a standard top tube. It allows you to carry bicycles including full-suspension, women's, and children's bikes, and those with oversize tubing on your trunk or hitch-mounted carrier.
This is a one bike add-on to turn your MonoRail 2-inch (sold separately) into a three bike carrier. Simply remove the end cap from the MonoRail, slide the attachment in and it quickly secures with two bolts. The cable lock included with the MonoRail is long enough to secure all three bikes. Simply and easy. Not compatible with 1.25-inch MonoRail.
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
Adapt your Swagman G10 platform hitch rack (sold separately) to accommodate fat bikes with wheel trays that fit wide tires. - G10 Fat Bike Wheel Holder (set includes 2 wheel trays)
Yakima's ArmLock cable lock is compatible with their DoubleDown Ace rack (sold separately). It integrates into the rack, stowing in the rack's arm when the lock is not in use. And, you simply pull it out and wrap it around the outside bike and lock it to safeguard your bikes on the rack.
• Pack includes 2 wheels straps and 2 road adaptors • The WS2 Thule Wheel Straps have a secure ratcheting buckle with a cam tightening mechanism.
- Great for storage or transportation - Alloy construction - Can be mounted vertically or horizontally
Yakima's BasketCase Stretch Net makes it easy to keep your gear in place on a Yakima BasketCase rack (sold separately). The Stretch Net's multi-hook design is versatile, easy to use and works great on odd-size items.
Swagman brings you a brilliant tool for storing your hitch-mount bike rack when it's not attached to your hitch. The X Mount can be attached to any wall to create a virtual hitch. Just mount the rack like you would on your car or truck, and fold the rack up against the wall to get it out of the way. When you're not using it, the X Mount itself will even fold against the wall, creating an even lower profile. - Fits 2-inch receiver style bike racks and 2-inch receivers with 1-1/4-inch universal adapter. - Stores bike rack when not in use - Folds against wall when not in use
- SportRack Hitch Pin Bolt with Lock - For SportRack Hitch Mounted Bike Racks
- Easy to load 2-Bike rack fits either 1 1/4" or 2" receiver hitch - Fits a wide variety of bicycle sizes and styles up to 35 lbs per bike - Tilts back for easy lift gate access - Folds for easy on or off car storage when not in use - Durable powder coated finish - Hitch Size/Mount: 1-1/4" - 2" - Capacity: 2 bikes
- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish
Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).
Thule's Tram Hitch Ski Carrier is your ticket to transporting skis and snowboards. It attaches to most Thule hitch or Spare Me racks (sold separately) and converts your hitch rack into a winter workhorse. Ultra-soft rubber arms hold skis and boards securely and oversize, Thule One-Key locking push buttons (included) make it easy to open the rack with gloved hands. It holds up to 6 pairs of skis or 4 snowboards so you can transport an entire car-load of people and their gear to the slopes.
Ultra premium lift assist carrier reduces up to 40lbs of a kayak's weight and allows side of vehicle loading, unloading, and strapping. Features - Gas struts lift and lower 40lbs or 90% of the kayaks weight - Load and unload kayaks at waist level, at the side of the vehicle for greater convenience and safety - Double extending arms lower the kayak up to 40” for faster loading and unloading - Corrosion-resistant kayak cradles expand to fit wide kayaks - 8 touch points of padded support for maximum protection for your kayak - Aluminum, double coated steel construction for corrosion resistance delivers a longer product life - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs Technical specifications - Load capacity Water Crafts: 1 kayak - Fits Aero Profile: Yes - Fits SquareBar: Yes - Lockable: Yes - One Key System compatible: Yes - Factory rack mounting hardware included: No - Carrying type: Lift Assist
Designed for pick-up trucks, this adjustable watersport carrier allows you to hold different sized kayaks, canoes, paddleboards and sailboards; even extra long loads. - Works with both the Hydro-Glide and Set-To-Go carriers (sold separately) - Hitch mounted,height adjustable load bars - Anti-sway design for stable, more secure transport - Telescoping mast adjusts to truck cab heights - “58” Thule steel load bar with durable plastic coating - 2 load straps to help stabilize and hold load - Works with 2” receivers only
This standard J-style cradle delivers superior carrying performance and protection with its 4-touchpoint adjustable padding and rust resistant steel design. - Steel design with adjustable padding for carrying strength and kayak protection - Quick on/off hardware ensures fast installation and removal - Wide mouth J-profile offers easier loading and unloading - Optimally sized J-style carrier leaves roof space for other Thule accessories - AllSurface rust-resistant coating and hardware for longer product life - Carries 1 kayak and requires 1 person to load and unload - 1 to 4 carriers per vehicle - Includes all straps to transport 1 kayak - Accommodates kayaks up to 36” wide and 75 lbs - Requires Thule rack systems crossbars, round bars or factory racks (sold separately) - Primary watercraft: Kayak
Thule's easiest loading canoe carrier with universal roof-rack compatibility - Durable gunwales with ramped sides provide easy loading - Cushioned weather-resistant base padding protects canoe during transit -Strong, durable load straps with buckle bumpers protect car and canoe from scratches - FlipFit bracket fits all Thule Rack Systems, round bars and most factory racks with single reversible mounting bracket - Includes all load straps and bow/stern ratcheting Quick Draw tie-downs necessary to easily secure one canoe
$69.95 - $79.95
Two 13-foot or 10-foot locking straps with One Key locking cylinders. - Two locking straps - Steel cables inside a theft-resistant nylon sleeve provide a dual-layer locking system - Lightweight and corrosion resistant aluminum buckle - Lock housing rubber-coated to prevent vehicle and equipment scratches - Two One-Key lock cylinders included
Thule Traverse Fit Kit is designed to integrate with the Thule Traverse foot, creating a multi-purpose roof rack base system for your specific vehicle. The unique fit that the Fit Kit provides is the most solid and secure base rack possible.
Page 1 of 10 Next page